How to: Compact filter replacement and maintenance To watch a demonstration on how to replace your Compact filters, please click the video below. Estimated Time: 7 Minutes Replacing the Pre-Filter Caution: Always disconnect power to the unit before servicing. First, make sure all power to the unit is shut off. Open the front panel, using the side tabs located on the lower panel, and pull towards you, then lift upwards. Remove the 6-stage pre-filter. The prefilter can be cleaned monthly by using a small vacuum cleaner wand. Based on typical use, we recommend replacing this filter every 6 months. Replacing the Main Filter Caution: Always disconnect power to the unit before servicing. First, make sure all power to the unit is shut off. Remove the prefilter by using a screwdriver. Remove the 2 screws holding the filter in place. Remove and discard the old main filter. Slide the new main filter into place and secure the main filter with the two screws. Reinstall the prefilter and the front cover. To reset the DFS indicator, turn the unit to medium speed and press the power button for 5 seconds. When the DFS indicator quickly flashes 3 times, the DFS timer is successfully reset. Based on typical use, we recommend replacing this filter every 12 months. Cleaning the High Energy Grid Caution: Always disconnect power to the unit before servicing. Follow the steps (above) of the filter replacement to remove the filters. Replace them if needed. Use a pipe cleaner or small vacuum to gently clean the wires on the high-energy grid. By WCP_admin|2021-06-09T00:15:57+00:00June 9th, 2021|Compact|0 Comments Share This Story, Choose Your Platform! FacebookTwitterRedditLinkedInWhatsAppTumblrPinterestVkEmail About the Author: WCP_admin Leave A Comment Cancel replyComment Save my name, email, and website in this browser for the next time I comment.